Instructions vary slightly based on the firmware version of your SmartVap+ controller. Please check your firmware version and select the appropriate Operation Manual below.
• Up to 86% fewer defrost cycles.
• 15-20% system energy savings.
• Energy savings through evaporator fan management.
• Defrost heater management.
86% fewer defrost cycles*
• Enhanced system performance
• Energy savings
• Improved product integrity
* Data may vary depending
on application
• Precise temperature control for prolonged product shelf life.
• Improved evaporator performance by minimizing excessive frost on the evaporator, effectively eliminating icing issues.
• Eliminates ice buildup on surfaces and product.
• Improved product integrity with less potential for spoilage.
• Various communication methods are available.
• Remote monitoring and system control.
• User-friendly interface.
• 32-day history stored locally on the controller (additional history available).
• Remotely view and change system parameters and alarm settings.
• Complete pre-assembled package or factory installed.
• Setup is quick and easy – just two pipes and two wires. A2L systems include an additional step: field install two safety shut-off valves.
• Effortless initial start-up.
• Adaptive control for air/electric defrost applications.
• “Bonding” ability for up to 8 controllers to maintain high efficiency on single or multiple unit cooler installs. Not a master/slave setup.
• Ability for integration with the door switch to improve efficiency and reduce frost issues.
• It can be easily set up using lead/lag systems.
• Manage system settings, perform diagnostics, troubleshoot, or service using the built-in display, laptop, remote monitoring, or mobile app.
• Advanced alarm notification text/email.
• Remote monitoring & system control.
• Downloadable data provides system history for the prior 30 days.
• User-friendly interface.
• Remotely view and change system parameters and alarm settings.
• Manually control the system.
• Improved system diagnostics and service through advanced alarm notification text/email.
• Easily troubleshoot issues.
• Complete isolation from the condensing unit/no wiring between the evaporator and the condensing unit.
• Defrost Initiation
• Defrost Termination
• Box Temperature
• Superheat
• Fan Motors
• Defrost Heater (Electric Defrost Models)
We combined award-winning adaptive technology with an electronic expansion valve to create the most efficient, easy-to-operate evaporators in commercial refrigeration.
SmartVap+ Intuitive Evaporator Control Technology is designed to replace traditional electro-mechanical refrigeration controls typically used on medium and low temperature applications.
SmartVap+ Intuitive Evaporator Control Technology provides the following benefits;
To End Users:
To Contractors:
Box Temperature, Superheat, Defrost Initiation, Defrost Termination, Fan Motors, Defrost Heater (Electric Defrost Models)
SmartVap+ units include an Adaptive Demand Defrost controller and defrost components, Electronic Expansion Valve, Liquid Line Solenoid Valve and an On-Board Display – all prepackaged and ready to install.
Interconnecting control wires, Room Thermostat, Mechanical Time Clock, and Defrost Kits
No. System Refrigerant will need to be selected but the the controller comes pre-programmed from the factory with default settings for typical Air or Electric Defrost applications. More advanced settings can be accessed through the remote dashboard.
No. The SmartVap+ controller comes complete with an on-board display mounted on the outside of the unit.
Bonding allows multiple controllers to synchronize refrigeration and/or defrost. It is required on systems with multiple evaporators on one condensing unit with no unloading capability. Bonding can be done easily through the controller webpages, but can also be done from the SmartVap+ Basic Display. Bonding is limited to two controllers through the SmartVap+ Basic Display. *firmware must be same on all boards
No, the controller can be connected to through standard WAN or LAN network connections.
No, The Same SmartVap+ control is used on our Medium temp (35° Coolers) and Low Temp (-10° Freezers) evaporators.
The SmartVap+ Evap OEM controller includes a webpage interface built-into the hardware, no internet access is necessary to access the controller’s webpage when on-site or in the local network. When the controller is provided access to the Internet, KE2 SmartAccess allows unprecedented real-time access to the controller via patented communication techniques, detailed data logs, graphs, alerts, and much more.
Yes, if the control is connected to an internet connection, it can be programmed to send an e-mail or text for any alarm condition.
A1 Refrigerants – R-404A, R-449A, R-448A, R-407C, R-407A, R-507
A2L – Refrigerants R-454A, R-454C, R-455A
Instructions vary slightly based on the firmware version of your SmartVap+ controller. Please check your firmware version and select the appropriate video below.
Installing an evaporator utilizing the SmartVap+ Intuitive Evaporator Control Technology is simple. In most cases, it’s two pipes, two wires and you’re done. No interconnecting control wiring between the evaporator and the condensing unit is required. For your convenience, Bally Refrigeration has put together the below instructional videos to get your SmartVap+ up and running as quickly and smoothly as possible.
