BEZ – Indoor/Outdoor Air Cooled Scroll Condensing Units
June 29, 2016BEH – Indoor/Outdoor Air Cooled Hermetic Condensing Units
CONTACT A PRODUCT SPECIALIST TODAY:
Features/Options
Certification:
Most models meet or exceed the new “AWEF” requirements for condensing units. Use this guide which collects all of the AWEF numbers for compliant equipment: https://docs.b-rp.ca/awef/br_awef_quick_reference.pdf
Features:
Indoor Unit:
- Weatherproof electrical control box with compressor contactor and fused control circuit
- Welded-hermetic compressor
- High efficiency enhanced tube and fin condenser design
- Pre-formed piping
- Quiet fan motor operation
- SmartSpeed EC Fan Motor Technology standard on models using chassis 1 and 2 (See our Product Data and Specifications for full details (PDF))
- Energy efficient PSC condenser fan motor on models using chassis 3 (See our Product Data and Specifications for full details (PDF))
- Electrical control panel away from air flow stream
- Wide-open front design, spring latches and handle on 5Hp MT & HT or larger
- Unit leak tested and shipped with helium holding charge
- Painted cabinet
- Receiver with fusible plug and liquid shut off valve
- Suction service valve
- Copper tubing secured with cushion clamps
- Fixed high and low pressure control
Outdoor Unit: All Standard Features of Indoor Unit, Plus:
- Painted weather-resistant housing with removable hood
- Flooded head pressure control (non adjustable)
- Crankcase heater
Available Options:
- Sealed suction filter
- Suction accumulator
- Suction accumulator with boil-out coil
- Heated and insulated receiver
- Sealed liquid line filter drier and sight glass
- Liquid line solenoid valve with 230-volt coil (shipped loose)
- Compressor circuit breaker
- Compressor time delay relay
- QuickVac Evacuation and Refrigerant Recovery Valves
- Variable speed EC motors as head pressure control (see Bulletin B40-HPC-AG for details)
- SmartSpeed Fan Motor Technology on models using chassis 3 (See our Product Data and Specifications for full details (PDF))
- Pump down toggle switch
- Electric defrost kit with mechanical time clock and contactors, as required
- Hoffman variable fan speed control
- Lockout control circuit relay (for liquid solenoid valve)
- Disconnect switch (fused or non-fused)
- Electronic phase / voltage monitor
- Leg kit or air discharge hood
